AC32M. Nitrogen oxides analyzer (NO, NOx, NO2)
Chemiluminiscence technology based, TÜV & US EPA approved
AC32e – e-Series NO, NO2 and NOx Analyzer (NH3 optionally)
QAL1 certified by the TÜV, the AC32e offers superior metrological performances for NO, NO2 and NOx measurements in the range 0-1 ppm or 0-10 ppm
AF22e. New e-series SO2 analyzer
UV Fluorescent sulfur dioxide analyzer AF22e, TUV certified and US-EPA approved for compliance with ISO 10498, 2008/50/EC, en 14212, EN 15267, 40 CFR part 53 SUB B and SUB C
AS32M- CAPS analyzer for quick and direct NO2 monitoring
Designed to alleviate potential disadvantages of the chemiluminiscence method and to provide the most accurate value for NO2 concentration measurements.
CO12e. New e-series CO analyzer
Non dispersive Infra Red carbon monoxide analyzer CO12e, TUV certified and US-EPA approved for compliance with ISO 4224, EN 14626, EN 15267, 40 CFR part 53 SUB B and SUB C
Data acquisition systems e-SAM – iséo
Environmental DAHS – data acquisition and handling systems
ESA Connect™ application for smartphone and tablet
Mobile app for full emulation of AQMS analyzers
HC51M. Hydrocarbon analyzer
FID Hydrocarbon (CH4, nmHC, THC) Analyzer
MGC101 – Multi-Gas Calibrator
Multi-gas calibrator for ambient air gas analyzers
MMS – Micro monitoring station
Turnkey AQMS Micro Monitoring Station, ISO and EN regulations compliant, MCERTs certified.
MP101M – Continuous, Automatic PM10, PM2.5, PM1, TSP Particulate Monitor
MP101M is certified equivalent to the reference method in accordance with the EN12341 European standards for PM10 and PM2.5 particulate concentration, respectively EN14907 and US EPA for the continuous monitoring of PM10 or PM2.5.
MP101M with CPM – Automatic & Real-Time Particulate Monitor
The standard Beta gauge measurement Method ISO 10473 of the MP101M dust monitor allows, when used with the patented optical technology of the CPM module, the continuous and simultaneous measurement of fine particulates.
O342e. New e-series ozone O3 analyzer
UV Photometric Ozone Analyzer O342e TUV certified and US-EPA approved for compliance with ISO 13964, 2008/50/EC, EN 14625, EN 15267, 40 CFR part 53 and 40 CFR part 58
PM162M – Automatic Sequential Particulate Sampler (TSP / PM10 / PM2.5 / PM1)
PM162M is a sequential automatic sampling device for particulate matter in the ambient air. The particles are sampled at constant flow rate (1 m3/h or 2.3 m3/h) and collected on filters for gravimetric weighing and possible physicochemical laboratory analysis. Complies with EN 12341.
Processing and reporting data software XR®
XR: Data acquisition and handling system for the air quality monitoring networks
Multigas Open Path Differential Optical Absorption (DOAS) Spectrometry Analyzer
Système de Dilution
Système multigaz par Dilution
VOC72M – VOC ( BTEX ) analyzer based on gas chromatography (GC) and photo-ionization detector (PID)
QAL1 certified by the TUV following EN 14662-3 for benzene monitoring. Standard measured compounds: Benzene, Toluene, Ethylbenzene, m+p-Xylene, o-Xylene, 1-3 Butadiene (up to 40 other compounds on request)
ZAG7001 – Zero Air Generator
Ultra pure Zero air generation for ambient air gas analyzers and calibrators
e-Series ecodesigned Criteria Pollutants Analyzers
Dedicated to the measurement of regulated pollutants such as ozone (O3), carbon monoxide (CO), sulfur dioxide (SO2) and nitrogen oxides (NO- NO2 and NOx), the e-Series of analysers, has been designed with a special consideration to the environmental impacts of the product during its whole lifecycle:
→ Télécharger le fichier (1.5 MiB)