AC32M. Nitrogen oxides analyzer (NO, NOx, NO2)
Chemiluminiscence technology based, TÜV & US EPA approved
AC32e – e-Series NO, NO2 and NOx Analyzer (NH3 optionally)
QAL1 certified by the TÜV, the AC32e offers superior metrological performances for NO, NO2 and NOx measurements in the range 0-1 ppm or 0-10 ppm
AF22e. New e-series SO2 analyzer
UV Fluorescent sulfur dioxide analyzer AF22e, TUV certified and US-EPA approved for compliance with ISO 10498, 2008/50/EC, en 14212, EN 15267, 40 CFR part 53 SUB B and SUB C
AS32M- CAPS analyzer for quick and direct NO2 monitoring
Designed to alleviate potential disadvantages of the chemiluminiscence method and to provide the most accurate value for NO2 concentration measurements.
CO12e. New e-series CO analyzer
Non dispersive Infra Red carbon monoxide analyzer CO12e, TUV certified and US-EPA approved for compliance with ISO 4224, EN 14626, EN 15267, 40 CFR part 53 SUB B and SUB C
ESA Connect™ application for smartphone and tablet
Mobile app for full emulation of AQMS analyzers
HC51M. Hydrocarbon analyzer
FID Hydrocarbon (CH4, nmHC, THC) Analyzer
MMS – Micro monitoring station
Turnkey AQMS Micro Monitoring Station, ISO and EN regulations compliant, MCERTs certified.
Mercury Ultratracer UT-3000 Total Gaseous Mercury monitoring (TGM) in Air and other Gases at Ultra Trace Levels
Utilizing the high performance GoldTrap amalgamation module and an optimized state-of-the-art AA-mercury vapor detector the UT-3000 mercury UltraTracer monitor offers detection limits at sub-ng/m³ (ppq-parts per quadrillion) levels.
O342e. New e-series ozone O3 analyzer
UV Photometric Ozone Analyzer O342e TUV certified and US-EPA approved for compliance with ISO 13964, 2008/50/EC, EN 14625, EN 15267, 40 CFR part 53 and 40 CFR part 58
VOC72M – VOC ( BTEX ) analyzer based on gas chromatography (GC) and photo-ionization detector (PID)
QAL1 certified by the TUV following EN 14662-3 for benzene monitoring. Standard measured compounds: Benzene, Toluene, Ethylbenzene, m+p-Xylene, o-Xylene, 1-3 Butadiene (up to 40 other compounds on request)
e-Series ecodesigned Criteria Pollutants Analyzers
Dedicated to the measurement of regulated pollutants such as ozone (O3), carbon monoxide (CO), sulfur dioxide (SO2) and nitrogen oxides (NO- NO2 and NOx), the e-Series of analysers, has been designed with a special consideration to the environmental impacts of the product during its whole lifecycle: