AC32e – e-Series NO, NO2 and NOx Analyzer (NH3 optionally)
QAL1 certified by the TÜV, the AC32e offers superior metrological performances for NO, NO2 and NOx measurements in the range 0-1 ppm or 0-10 ppm
Data acquisition systems e-SAM – iséo
Environmental DAHS – data acquisition and handling systems
Dilution extractive CEMS
Multigas dilution system
GRAPHITE 52M – Heated FID Hydrocarbons (THC / NmHC / CH4) Analyzer
The Graphite52M is one of the sole hydrocarbons analyzers offering QAL1 certification according to EN 14181 & EN15267-3, and to be also available in a transportable version.
HOFI BOX – Stack Gas Sampling System
Hot extractive Stack gas sampling system. The HOFI BOX offers an exclusive sampling system dedicated to heated analyzers ( e.g. MIR FT, MIR 9000H, Graphite 52M, Topaze 32M… ).
LAS300XD – cross duct TDLAS laser absorption gas analyzer
TDL analyzer for cross stack measurements of hydrofluoric acid HF, hydrochloric acid HCl, ammonia NH3, Low and high carbon monoxide CO, Oxygen monitoring O2
MIR 9000CLD – Multi-Gas IR-GFC & CLD Analyzer
MIR 9000 is a multi-gas Non Dispersive Infra-Red analyzer, using the Gas Filter Correlation technique (GFC). MIR 9000 CLD includes a built-in chemiluminescence module for the measurement of low to ultra-low concentration of nitrogen oxides (NOx) and a paramagnetic sensor for O2 measurements. Unique : 20 mg/Nm3 QAL1 certified range.
MIR 9000H – Heated multi-gas infra-red GFC analyzer
The MIR 9000H is a multi-gas infrared analyzer using the Gas Filters Correlation technology (GFC). With its hot measurement principle (180°C on a hot and humid sample), the MIR 9000H is the perfect tool for the analysis of the main gas parameters in many applications, including DeNOx (SCR / SNCR) and the optimization of flue gas treatment processes.
MIR IS – Close-coupled IR-GFC in situ multi-gas analyzer
Complete CEMS in one cabinet – combines infrared analyzer, sample conditioning system and probe into one device to measure: HCl, NO, NO2 (NOx), SO2, CO, CO2, HC, CH4 (TOC), HF, N2O, O2 …
Portable GRAPHITE 52M
QAL 1 certified by the TÜV, MCERTs certified and compliant with NF EN 12619, EN 13526, EN 14181 for simultaneous, real time and continuous volatil organic compounds monitoring.
QAL 181 – TÜV and MCERTS approved Particulate Continuous Emission Monitor
The QAL 181 dust analyzer is suitable for measuring particle emissions after both bagfilter and electrostatic precipitator arrestment plant. The monitor is suitable for measuring both low (0.1mg/m3) and high particulate concentration levels (300mg/m3). TÜV and MCERTS certified
QAL 991 – Dust / Particulates monitor
Suitable for industrial processes controlled with dry scrubbing and high efficiency bag filtration
QAL260 – New QAL1 certified particulate analyzer
The QAL 260 series is suitable for measuring dust concentrations in Combustion, Incineration and other industrial stacks and is compliant with EN 14181. Having a 0-15 mg/m³ certification range, the QAL 260 sensor can be used at low or high dust levels. Due to dynamic ranging, the sensor is also suitable for much higher dust levels found in Power, Cement and Metals smelting processes.
SEC Box – permeation based, Stack gas sampling system
Designed to meet almost all stack gas conditions using exclusive permeation method : ideal for sampling of corrosive gases
SM-4 Continuous mercury emissions analyzer
Mercury Instruments (Environnement S.A Group) has developed the SM-4 analyzer specifically for total mercury emission monitoring applications in order to measure very low levels of mercury in flue gases as well as complex matrices (SO2, NOx, HCl, etc.) with high accuracy and reliability
STACKFLOW 200 – QAL1 certified Averaging Pitot flowmeter
The STACKFLOW 200 uses the wellestablished Averaging Pitot sensor technology to provide continuous emission monitoring of Flow, Temperature and Pressure. Utilised as a standalone sensor or in combination with Environnement S.A & PCME analyzers and controllers for the monitoring of particulates, gases and flue gas as part of a larger monitoring network
Stackflow 400 – QAL 1 certified Ultrasonic flowmeter
The STACKFLOW 400™ is an advanced flue gas flow measurement system for continuous monitoring of releases from industrial sources complying with European monitoring standard EN 16911-2:2013 and 15267-3.
TOPAZE 32M – Heated Chemiluminescence Nitrogen Oxides Analyzer
Utilizes the CLD technique (chemiluminescence) for continuous and simultaneous measurement of NO, NO2 and NOx, in compliance with EN14792
→ Télécharger le fichier (1.5 MiB)